Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1440

JUNOSe 11.1.x Command Reference Guide N to Z
vbr-nrt
vbr-nrt pcr scr mbs
Syntax
no vbr-nrt
Command introduced in JUNOSe Release 7.1.0.
Release Information
ATM VC Class Configuration mode added in JUNOSe Release 7.3.0.
In ATM VC Configuration mode, configures the variable bit rate, nonreal time
Description
(VBR-NRT) service category on an ATM PVC. You must specify the peak cell rate
(PCR), sustained cell rate (SCR), and maximum burst size (MBS). The vbr-nrt
command is valid only for data PVCs; you cannot use this command for control (ILMI
or signaling) PVCs. The no version restores the default service category, unspecified
bit rate (UBR) without a PCR.
In ATM VC Class Configuration mode, configures the VBR-NRT service category as
part of a VC class definition that you assign to an ATM PVC. The no version restores
the default service category, UBR without a PCR, in the VC class.
Options
ATM VC Configuration, ATM VC Class Configuration
Mode
1398
vbr-nrt
pcr Peak cell rate, in Kbps, in the range 0–149760 (for OC3 ATM modules) or
0–599040 (for OC12 ATM modules)
scr Sustained cell rate, in Kbps, in the range 0–149760 (for OC3 ATM modules)
or 0–599040 (for OC12 ATM modules)
mbs Maximum burst size, in cells, in the range 0–16777215