Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1352

JUNOSe 11.1.x Command Reference Guide N to Z
timing select
timing select selector
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the preferred timing selector. There is no no version.
Description
Options
Global Configuration
Mode
1310
timing select
selector Timing selector; one of the following:
primary Highest-priority preferred selection
secondary Middle-priority preferred selection
tertiary Lowest-priority preferred selection