Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1337

* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
fields Displays only the specified fields; the display order of the fields is
hard-coded and not affected by the order in which you enter them
fieldOptions Fields to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities
| extended-communities | imported | intro | in-label | loc-pref | med | next-hop
| next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi |
stale | unknown-types | weight ]*
all All available information; not recommended, because this information
for each network does not fit on a single line and is difficult to read
afi Address family identifier
aggregator AS number and IP address of aggregator
as-path AS path through which this route bas been advertised
atomic-aggregate Whether the atomic aggregate attribute is present
best Whether this is the best route for the prefix
clusters List of cluster IDs through which the route has been advertised
communities Community number associated with the route
extended-communities Extended community
imported Whether the route was imported
intro Introductory information about the state of various BGP attributes;
this information is displayed only if you specify this keyword
in-label MPLS label for the route; the label received with incoming MPLS
frames; typically, but not always, this is the label advertised to MP-BGP peers
loc-pref Local preference for the route
med Multiexit discriminator for the route
next-hop IP address of the next router that is used when forwarding a
packet to the destination network
next-hop-cost Whether the indirect next hop of the route is unreachable,
if not, displays IGP cost to the indirect next hop
origin Origin of the route
originator-id Router ID of the router in the local AS that originated the route
out-label MPLS label for the route; the label sent with outgoing MPLS frames;
also the label received from MP-BGP peer; typically, but not always, this is
the label received from MP-BGP peers
peer IP address of BGP peer from which route was learned
Chapter 8: T Commands
1295
test bgp ipv6 neighbor