Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1365

For e series broadband service routers
Table of Contents

Advertisement

traceroute
traceroute [ vrf vrfName ] destination [ ttl maxTTLCount ]
Syntax
[ timeout timeOutVal ] [ data-size sizeValue ]
[ source { interface interfaceType interfaceSpecifier | address sourceAddress } ]
[ extended [ tos tosVal ] [ set-dont-fragment-bit ] [ interface iType iNumber ]
traceroute ipv6 [ vrf vrfName ] destination [ hop-limit hopLimit ]
[ timeout timeOutVal ][ data-size sizeValue ] [ source { interface interfaceType
interfaceSpecifier |
address sourceAddress } ] [ extended [ dscp trafficClass ] [ flow-label flowLabel ] ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
vrf keyword and vrfName variable added to IPv6 version in JUNOSe Release 7.2.0.
Discovers the paths that router packets follow when traveling to their destinations.
Description
There is no no version.
Options
vrfName Name of the VRF context; string of 1–32 alphanumeric characters
ipv6 Specifies the destination address as IPv6 format
destination IP address, IPv6 address, or domain name of the trace
hopLimit Maximum number of hops of the trace in the range 1–255; default
value is 32
maxTTLCount Maximum number of hops of the trace in the range 1–255;
default value is 32
timeOutVal Time in seconds to wait for trace responses in the range 1–20;
default value is 2
sizeValue Number of bytes comprising the IP packet and reflected in the IP
header in the range 0–64000
source interface Specifies an interface as the source for the transmitted packets
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier Particular interface; format varies according to interface
type; see Interface Types and Specifiers on page 5
source address Specifies an IP address as source for the transmitted packets
sourceAddress IP address or domain name used as the source address
extended Specifies extended IP header attributes
tosVal Value of the ToS byte
set-dont-fragment-bit Specifies the don't-fragment bit
iType Interface type
iNumber Interface location
Chapter 8: T Commands
1323
traceroute

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents