Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1336

JUNOSe 11.1.x Command Reference Guide N to Z
test bgp ipv6 neighbor
test bgp ipv6
Syntax
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ]
neighbor { ipAddress | ipv6Address | peerGroupName }
{ advertised-routes | routes } [ ipv6Prefix ]
[ distribute-list accessListName |
filter-list asPathAccessListName [ weight weightValue ] |
prefix-list prefixListName | prefix-tree prefixTreeName | route-map mapTag ]*
[ fields { fieldOptions } ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
route-target signaling keywords added in JUNOSe Release 8.2.0.
Tests BGP policy for IPv6 BGP routes advertised to or received from peers without
Description
implementing the policy. There is no no version.
Options
1294
test bgp ipv6 neighbor
unicast Specifies the IPv6 unicast address family and routing table; the default
option
multicast Specifies the IPv6 multicast address family and routing table
vpnv6 all Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
route-target signaling Specifies the route-target address family
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group
advertised-routes Tests only the outgoing advertisements to the specified BGP
neighbor or peer group
routes Tests only the incoming routes originating from the specified BGP
neighbor or peer group
ipv6Prefix IPv6 prefix for which you want information displayed
accessListName Name of the access list to use as the distribute list to filter routes
by prefix; string of up to 32 alphanumeric characters
asPathAccessListName Name of a single AS path access list used to filter routes
by AS path; string of up to 32 characters
weightValue Weight assigned to incoming routes matched by the AS path access
list; integer in the range 0–4294967295
prefixListName Name of a BGP prefix list used to filter routes by prefix
prefixTreeName Name of a BGP prefix tree used to filter routes by prefix
mapTag Name of a route map; string of up to 32 alphanumeric characters