Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1314

JUNOSe 11.1.x Command Reference Guide N to Z
tacacs-server timeout
tacacs-server timeout timeoutValue
Syntax
no tacacs-server timeout
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the interval in seconds that the server waits for the TACACS+ server host to
Description
reply. This value is shared by those TACACS+ servers that do not have a timeout
interval set by the tacacs-server host command. The no version resets the timeout
interval shared by all TACACS+ servers.
Options
Global Configuration
Mode
1272
tacacs-server timeout
timeoutValue Response timeout interval for the TACACS+ client to server
exchange; number in the range 1–255; default value is 5