Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1285

svlan ethertype
svlan ethertype ethertypeValue
Syntax
no svlan ethertype
Command introduced before JUNOSe Release 7.1.0.
Release Information
88a8 keyword added in JUNOSe Release 7.1.0.
In Interface Configuration mode, specifies the Ethertype of an S-VLAN. The no version
Description
restores the default value, 9100.
In Profile Configuration mode, specifies the available Ethertypes that the packet must
use to create a dynamic VLAN subinterface. The no version restores the default value,
autoconfig.
Options
Interface Configuration, Profile Configuration
Mode
Related Topics
ethertypeValue One of the following Ethertype values:
8100 Specifies Ethertype value 0x8100, as defined in IEEE Standard 802.1q
88a8 Specifies Ethertype value 0x88a8, as defined in draft IEEE Standard
802.1ad
9100 Specifies Ethertype value 0x9100, which is the default for Interface
Configuration mode
autoconfig Specifies in a VLAN profile that the packet can use any Ethertype
to create a dynamic VLAN subinterface; this is the default for Profile
Configuration mode
Configuring S-VLAN Tunnels for Layer 2 Services in the JUNOSe BGP and MPLS
Configuration Guide
Chapter 7: S Commands
1243
svlan ethertype