udp-port
udp-port port
Syntax
no udp-port
Command introduced before JUNOSe Release 7.1.0.
Release Information
From RADIUS Configuration mode, specifies the UDP port on the router where the
Description
RADIUS authentication, accounting, or dynamic-request servers reside. The router
uses this port to communicate with the RADIUS servers. The no version restores the
default value.
From RADIUS Relay Configuration mode, specifies the UDP port on the router where
the RADIUS relay authentication or accounting server resides. The router uses this
port to communicate with the RADIUS relay servers. The no version restores the
default value.
Options
RADIUS Configuration, RADIUS Relay Configuration
Mode
Related Topics
port Port number in the range 1–65535
1812 Default for RADIUS and RADIUS relay authentication servers
1813 Default for RADIUS and RADIUS relay accounting servers
1700 Default for RADIUS dynamic-request servers
Configuring RADIUS-Based Mirroring
Chapter 9: U, V, W, and Y Commands
udp-port
1379