Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1392

JUNOSe 11.1.x Command Reference Guide N to Z
tunnel mpls affinity
tunnel mpls [ traffic-eng ] affinity affinity [ mask mask ]
Syntax
no tunnel mpls [ traffic-eng ] affinity
Command introduced before JUNOSe Release 7.1.0.
Release Information
Assigns an affinity to the tunnel that specifies the class of resources resource
Description
attributes associated with the tunnel. The no version removes the affinity from the
tunnel.
Options
Interface Configuration, Tunnel Profile Configuration
Mode
1350
tunnel mpls affinity
traffic-eng Specifies optional keyword for compatibility with non–E Series
implementations
affinity Attributes that must be configured on the interface in order to be
considered by the tunnel; in the range 0x0–0xFFFFFFFF; default value is 0x0
mask Mask to identify attributes to be checked and therefore the attribute flags
that a link (interface) must have in order to be used by a tunnel: a 1 signifies
that the attribute value must match the tunnel's corresponding affinity bit; a 0
signifies that the attribute value does not matter and does not have to match the
tunnel's affinity bit; in the range 0x0–0xFFFFFFFF; default value is 0x0000FFFF