Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1308

JUNOSe 11.1.x Command Reference Guide N to Z
t1 timeslots
t1 channel/subchannel timeslots range [ speed { 56 | 64 } ]
Syntax
no t1 subchannel
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the timeslots and data rate used on each T1 channel on the CT3 interface.
Description
The no version deletes the fractional T1 circuit.
Options
Controller Configuration
Mode
1266
t1 timeslots
channel T1 channel number in the range 1–28
subchannel Subchannel specifies the logical subchannel on a T1 in the
range 1–24
range Specifies the timeslot assigned to the T1 channel, in the range 1–24. A
dash represents a range of timeslots, and a comma separates timeslots. For
example, 1-10, 15-18 assigns timeslots 1 through 10 and 15 through 18.
speed Specifies the data rate for the T1 channel, either 56 Kbps or 64 Kbps;
default value is 64 Kbps