Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1284

JUNOSe 11.1.x Command Reference Guide N to Z
suspicious-control-flow-detection protocol threshold
suspicious-control-flow-detection protocol protocolValue threshold thresholdValue
Syntax
no suspicious-control-flow-detection protocol protocolValue threshold
Command introduced in JUNOSe Release 7.3.0.
Release Information
Sets a threshold rate at which a flow becomes suspicious for a specific protocol. The
Description
no version restores the default for a protocol, which is a protocol-dependent numeric
value.
Options
Global Configuration
Mode
1242
suspicious-control-flow-detection protocol threshold
protocolValue Name of the protocol
thresholdValue Zero or a number in the range 3–65535; when set to zero, no
flows for the protocol type are considered suspicious