Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1459

vlan profile
vlan profile upperInterfaceType profileName
Syntax
no vlan profile upperInterfaceType profileName
Command introduced in JUNOSe Release 7.1.0.
Release Information
Adds a nested profile assignment to a base profile for a dynamic VLAN subinterface.
Description
A nested profile assignment references another profile that dynamically configures
upper interface encapsulation types over the VLAN subinterface. The no version
removes the profile assignment for the upper interface type.
Options
Profile Configuration
Mode
upperInterfaceType One of the following dynamic encapsulation types:
ip
pppoe
profileName Profile name of up to 80 characters
Chapter 9: U, V, W, and Y Commands
vlan profile
1417