Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1312

JUNOSe 11.1.x Command Reference Guide N to Z
tacacs-server key
tacacs-server key keyValueString
Syntax
no tacacs-server key
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets or resets the authentication and encryption key value shared by all TACACS+
Description
servers that do not have a server-specific key set up by the tacacs-server host
command. The no version removes the key value shared by all TACACS+ servers.
Options
Global Configuration
Mode
1270
tacacs-server key
keyValueString String of up to 100 characters; must match key configured on
the TACACS+ daemon