Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1253

source-address
source-address sourceAddress
Syntax
no source-address
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a source IP address for the LAC tunnel endpoint. The no version removes
Description
the source address.
Options
Domain Map Tunnel Configuration, Tunnel Group Tunnel Configuration
Mode
sourceAddress Address of the local tunnel endpoint (the LAC); can be up to 32
characters (no spaces)
Chapter 7: S Commands
1211
source-address