Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1457

vlan policy
vlan policy { input | output } policyName
Syntax
[ statistics { enabled [ baseline { enabled | disabled } ] [ preserve | merge ] |
disabled [ merge ] } | merge ]
no vlan policy { input | output } [ policyName ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
merge keyword added in JUNOSe Release 7.2.0.
Profile Configuration mode added in JUNOSe Release 7.2.0.
Assigns a VLAN policy list to an interface. If you enter the vlan policy command and
Description
the policy list does not exist, the router creates a policy list with no rules, the default.
When no rules are found in a policy list, the router performs a routing table lookup
and forwards packets on the interface based on the routing table information. You
must specify the input or output keyword to assign the policy list to the ingress or
egress of the interface.
In Profile Configuration mode, assigns the policy list to a profile, which then assigns
the policy to an interface.
In Interface Configuration mode, the no version removes the association between a
policy list and an interface. In Profile Configuration mode, the no version removes
the policy reference from the profile.
Options
Interface Configuration, Profile Configuration
Mode
Related Topics
input Applies policy to data arriving at this interface
output Applies policy to data leaving this interface
policyName Name of the policy; a maximum of 40 characters
statistics Enables or disables collection of policy routing statistics
enabled Enables collection of policy routing statistics
baseline enabled Enables baselining of policy routing statistics
baseline disabled Disables baselining of policy routing statistics
preserve Preserves existing statistics for any classifier list that is the same
for both the new and old policy attachments when you attach a new policy
to an interface
disabled Disables collection of policy routing statistics
merge Enables merging of multiple policies to form a single policy
Setting a Statistics Baseline for Policies
Chapter 9: U, V, W, and Y Commands
vlan policy
1415