Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1335

test aaa
test aaa { ppp | mlppp } userName [ password ] [ virtual-router vrContext ]
Syntax
[ aaa-profile profileName ] [ zero-stats ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Verifies RADIUS authentication and accounting and IP (or IPv6) address assignment
Description
setup. The test uses a username and password and attempts to authenticate a user,
get an address assignment, and issue a start accounting request. The test immediately
terminates the session by issuing a stop accounting request and an address release.
Optionally, a virtual router context may be specified. There is no no version.
Options
Privileged Exec
Mode
ppp Indicates a PPP user
mlppp Simulates Multilink PPP
userName Username to test
password Password to associate with username; the password is optional when
omitted, the RADIUS access request has no User-Password attribute
vrContext Virtual router context in which to authenticate the user
profileName Name of AAA profile for the user
zero-stats Specifies that accounting statistics should be set to zero for this test
filter See Filtering show Commands on page 4
Chapter 8: T Commands
1293
test aaa