Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1445

vlan advisory-rx-speed
vlan advisory-rx-speed speed
Syntax
no vlan advisory-rx-speed
Command introduced in JUNOSe Release 7.2.0.
Release Information
Sets an advisory receive (Rx) speed that the LAC sends to the LNS. The no version
Description
restores the default behavior, in which the Rx speed is not sent to the LNS.
Options
Profile Configuration, Subinterface Configuration
Mode
speed Speed in the range 0–2147483647 kbps; 0 indicates no advisory speed
setting
Chapter 9: U, V, W, and Y Commands
vlan advisory-rx-speed
1403