Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1323

tcp resequence-buffers default-vr-maximum
[ ip ] tcp resequence-buffers default-vr-maximum defaultVrMaxValue
Syntax
no [ ip ] tcp resequence-buffers default-vr-maximum
Command introduced before JUNOSe Release 7.1.0.
Release Information
ip keyword made optional in JUNOSe Release 7.2.0.
Specifies the default buffer limit assigned to all virtual routers when the virtual router
Description
is established. Specifying a value of zero (0) turns off the limit assignment. The no
version reverts the virtual router maximum value to its default (100 buffers).
Options
Global Configuration
Mode
ip Optional keyword for use with older scripts
defaultVrMaxValue Default number of maximum buffers for newly established
virtual routers, in the range 1–65535
tcp resequence-buffers default-vr-maximum
Chapter 8: T Commands
1281