Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1343

threshold-test
threshold-test startup { falling | rising | risingorfalling }
Syntax
threshold-test absolute-value rising risingValue falling fallingValue
threshold-test event { rising eventOwner eventName | falling eventOwner eventName
| delta-rising eventOwner eventName | delta-falling eventOwner eventName }
threshold-test delta-value rising risingValue falling fallingValue
no threshold-test [ startup | absolute-value | delta-value | event rising | event falling
| event delta-rising | event delta-falling ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines the values for an SNMP threshold-test trigger. The no version deletes the
Description
threshold-test values for this trigger or removes either the threshold startup condition
or event binding.
Options
SNMP Trigger Configuration
Mode
startup Startup threshold condition that you predict the sample to follow
falling Specifies that the sample values are expected to be falling values
rising Specifies that the sample values are expected to be rising values
risingorfalling Specifies that the sample values might be either rising values
or falling values
absolute-value Specifies that the trigger is monitoring absolute threshold values
risingValue Rising threshold value for the trigger, in the range
-2147483648–2147483648
fallingValue Falling threshold value for the trigger, in the range
-2147483648–2147483648
event Binds an event owner and name to specific events on which the
threshold-test might trigger: rising values within a sample, falling values within
a sample, rising values between samples, or falling values between samples
eventOwner Event owner name; string of up to 32 alphanumeric characters
eventName Event name; string of up to 32 alphanumeric characters
delta-value Specifies that the trigger is monitoring the difference (delta)( between
sample values
Chapter 8: T Commands
1301
threshold-test