Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1444

JUNOSe 11.1.x Command Reference Guide N to Z
virtual-router
virtual-router vrName | :vrfName | vrName:vrfName
Syntax
no virtual-router vrName [ wait-for-completion [ waitSeconds ] ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates a virtual router or accesses the context of a previously created virtual router
Description
or a VRF. The no version deletes the virtual router, and the router defaults to the
default virtual router. Issuing a no version that specifies an existing VRF only displays
the error message: " Cannot delete a VRF with this command." You must use the no
ip vrf command to remove a VRF.
NOTE: In Domain Map Configuration mode, the virtual-router command has been
replaced by the router-name command and may be removed completely from Domain
Map Configuration mode in a future release.
Options
Global Configuration, Privileged Exec
Mode
1402
virtual-router
vrName Name of the virtual router; a string of 1–32 alphanumeric characters
:vrfName Name of a VRF in the current VR context; a string of 1–32
alphanumeric characters
vrName:vrfName Name of a VRF in the context of a VR other than the current
VR
wait-for-completion Specifies (in the absence of waitSeconds) that the CLI waits
for completion of the no version operation before it returns a prompt, regardless
of how long that takes
waitSeconds Number of seconds, in the range 1–64000, that the CLI waits
before it returns a prompt, regardless of whether the no version operation has
been completed