Table of Contents
Advertisement
JUNOSe 11.1.x Command Reference Guide N to Z
vlan advisory-tx-speed
vlan advisory-tx-speed speed
Syntax
no vlan advisory-rx-speed
Command introduced in JUNOSe Release 7.2.0.
Release Information
Sets an advisory connect (Tx) speed that the LAC sends in the Tx connect speed to
Description
the LNS. The no version restores the default behavior, in which the Tx speed is not
sent to the LNS.
Options
Profile Configuration, Subinterface Configuration
Mode
1404
vlan advisory-tx-speed
speed Speed in the range 0–2147483647 kbps; 0 indicates no advisory speed
setting
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010
Related Products for Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010
- Juniper IDP OS 5.1R1 - S REV 1
- Juniper IGP - CONFIGURATION GUIDE V11.1.X
- Juniper IP - CONFIGURATION GUIDE V11.1.X
- Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X
- Juniper IPV6 - CONFIGURATION GUIDE V11.1.X
- Juniper JUNOS
- Juniper JUNOS - NETWORK OPERATION GUIDE REV1
- Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010
Need help?
Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 and is the answer not in the manual?