Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1311

tacacs-server host
tacacs-server host ipAddress [ port portNumber ]
Syntax
[ timeout timeoutValue ] [ key keyValueString ] [ primary ]
no tacacs-server host ipAddress
Command introduced before JUNOSe Release 7.1.0.
Release Information
Adds or deletes a host to or from the list of TACACS+ servers. If the host is not
Description
assigned as the primary host, the router assigns an existing host as the primary. The
no version deletes the host from the list of TACACS+ servers.
Options
Global Configuration
Mode
ipAddress IP address of the TACACS+ server
portNumber TACACS+ server's TCP port number in the range 1–655535
timeoutValue Response timeout interval for the TACACS+ client to server
exchange; number in the range 1–255; default value is 5
keyValueString Secret used in TACACS+ client to server exchange; string of up
to 100 characters
primary Assigns the host as the primary host
Chapter 8: T Commands
1269
tacacs-server host