Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1339

test ip bgp neighbor
test ip bgp
Syntax
[ ipv4 unicast | ipv4 multicast | vpnv6 all | vpnv6 vrf vrfName |
route-target signaling ] neighbor { ipAddress | ipv6Address | peerGroupName } {
advertised-routes |
routes } [ routeAddr [ routeMask [ route-rd distinguisher ] ] ]
[ distribute-list accessListName |
filter-list asPathAccessListName [ weight weightValue ] |
prefix-list prefixListName | prefix-tree prefixTreeName | route-map mapTag ]*
[ fields { fieldOptions } ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
route-target signaling keywords added in JUNOSe Release 8.2.0.
Tests BGP policy for routes advertised to or received from peers without implementing
Description
the policy. There is no no version.
Options
ipv4 unicast Specifies the IPv4 unicast address family and routing table; the
default option
ipv4 multicast Specifies the IPv4 multicast address family and routing table
vpnv4 all Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
vpvn4 vrf vrfName Specifies the IPv4 VPN address family and only the IPv4
VPN routing and forwarding instance with the name vrfName
route-target signaling Specifies the route-target address family
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
advertised-routes Tests only outgoing advertisements to the specified neighbor
routes Tests only the incoming advertisements from the specified neighbor
routeAddr Prefix advertised by BGP
routeMask Subnet mask associated with prefix; if not specified, a best match
on routeAddr is performed
distinguisher Unique two-part identifier of the format number1:number2 where:
number1 AS number or an IP address
number2 Unique integer; 32 bits if number1 is an AS number; 16 bits if
number1 is an IP address
Chapter 8: T Commands
1297
test ip bgp neighbor