Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1368

JUNOSe 11.1.x Command Reference Guide N to Z
traffic-class
In Classifier Group Configuration mode:
Syntax
[ no ] [ suspend ] traffic-class trafficClassName1
In Global Configuration and Traffic Class Group Configuration modes:
[ no ] traffic-class trafficClassName2
Command introduced before JUNOSe Release 7.1.0.
Release Information
In Classifier Group Configuration mode, specifies a traffic class in a policy list for
Description
policy management. The no version removes a traffic class from a policy list; the
suspend version temporarily suspends the policy rule; the no suspend version
resumes application of a suspended rule.
NOTE: This command replaces the Policy List Configuration version of the traffic-class
command, which may be removed completely in a future release.
In Global Configuration mode, configures a traffic class in the E Series router. In
Traffic Class Group Configuration mode, specifies a traffic class that belongs to the
traffic-class group. The no version deletes the traffic class.
Options
Classifier Group Configuration, Global Configuration, Traffic Class Group Configuration
Mode
Related Topics
1326
traffic-class
trafficClassName1 Name of the traffic class; up to 40 characters
trafficClassName2 Name of the traffic class; up to 31 characters
Configuring Traffic Classes That Define Service Levels
Configuring Traffic-Class Groups That Define Service Levels
Policy Rule Precedence