Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1315

tag
tag tagValue
Syntax
no tag
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a user-defined tag. You can configure a tag for both echo and echoPath
Description
types. The no version removes the tag from the operation.
Options
RTR Configuration
Mode
tagValue Name of a group to which the operation belongs; string of 0–255 ASCII
characters; default value is to have no tag
Chapter 8: T Commands
1273
tag