Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual page 1298

JUNOSe 11.1.x Command Reference Guide N to Z
t1 fdl carrier
[ no ] t1 channel fdl carrier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies that an interface is used in the carrier environment of a T1 channel on a
Description
CT3 interface. The no version restores the default situation, in which an interface
does not operate in the carrier environment.
Options
Controller Configuration
Mode
1256
t1 fdl carrier
channel One or more individual T1 channels, ranges of T1 channels, or
combination of individual channels and ranges, in the range 1–28 (no spaces);
for example, 3,7-15,19-13,27