Engine Controls And Gauges - MacDon M105 Operator's Manual

3.15 Engine Controls and Gauges

All engine controls are conveniently located on the
operator's console.
Refer to the illustration for the location and the following for
a description of each.
A – Ignition Switch
• ACC: Fully counterclockwise
• OFF: All electrical systems OFF
• RUN: Clockwise
• START: Fully clockwise to crank engine. Release and
switch returns to RUN
• REMOVE KEY WHEN WINDROWER NOT IN USE.
KEY ALSO LOCKS DOORS
B – Throttle controls engine speed.
• FULL: Push lever forward
• OPERATING: Refer to
94
• CLOSED: Pull lever back
169890
OPERATOR'S STATION
4.3.6 Windrower Operation, page
Figure 3.31: Engine Controls
A - Ignition Switch
54
B - Throttle
Revision A