YASKAWA GA700 Series Technical Manual page 993

8. Push or
9. Push or
Note: If analog trigger is selected for the trigger type, set the trigger target and trigger
level.
10. Push or
11. Push or
12. Push or
13. Push or
14. When you complete changing the value, push
The procedure to set the trigger is complete.
to select [Trigger Object], then push
to select the trigger target, then push
to select [Trigger Condition], then push
to select the trigger detection conditions, then push
to select [Pre-Trigger Setting], then push
to select the digit, then push
.
.
.
.
or to change the value.
.
D ocu ment No. E ZZ024048<1>
P r epared in October, 2021
.
9 / 19