Special Paper Size (No.04) - KIP 9000 Service Manual

(5) Special paper size (No.04)

The size sensor of Roll Deck 1 located 2nd from the outside is available to detect special paper
sizes (widths) 900mm, 891mm and 880mm. When a special size is detected, KIP9000 recognizes
its size as any of 900mm, 891mm or 880mm according to the selection in this No.04.
(If No.04 is set to "880", special size roll is recognized as 880mm wide even if it is 891mm or
900mm.)
Setting value Description
900 Special width of roll paper is recognized as 900mm wide.
891 Special width of roll paper is recognized as 891mm wide.
880 Special width of roll paper is recognized as 880mm wide.
NOTE
The PH5 of Roll 1 detects 880/891/900 as it is located between PH10 (A0/34") and PH11
(36"), but that of Roll 2/3/4 detedcts B3/15" as it is located between RP_SET (A3/11"/12") and
PH6 (A2/17"/18"). (In case of Roll 1, B3/15" is detected by PH41 located between RP_SET
(A3/11"/12") and PH6 (A2/17"/18").)
Sensor arrangement (Roll Decks 2, 3 and 4)
Center of the paper
Sensor arrangement (Roll Deck 1 only)
Center of the paper
PH11
(36")
PH10
(A0 & 34")
PH9
RP_SET2, 3 and 4
(B1 & 30")
(A3, 11" & 12")
PH5
(B3 & 15")
PH6
(A2, 17" & 18")
PH7
(B2 & 22")
PH8
(A1 & 24")
(36")
PH10
(A0 & 34")
PH9
RP_SET1
(B1 & 30")
(A3, 11" & 12")
PH41
(B3 & 15")
PH6
(A2, 17" & 18")
PH7
(B2, & 22")
PH8
(A1 & 24")
8-48
PH5
(900, 891 & 880mm)
K115sm8e2.doc