KIP 9000 Service Manual page 643

8. 1. 8. 3 Operation
1. Enter the Service Mode, and indicate the Sub Mode Number "8" on the 1st digit from the left
pressing the [ MENU ] Key.
2. The 2nd digit from the left indicates the Setting Mode Number presently selected. Indicate the
necessary Setting Mode Number pressing [
Refer to the following for the setting of each Setting Mode Number. And refer to the
"reference page" shown in the list for more description of each setting mode.
Example : "Print Number Setting Mode" is to be selected for deciding the number of print.
Indicate its Setting Mode Number "1".
Setting Mode No.
0
1
2
3
4
5
6
7
8
Sub Mode Number of Test Print Mode
MENU
MENU
MENU
Setting Mode Number of "Print Number Setting Mode"
Contents of setting
Print Start Mode
Print Number Setting Mode
Test Pattern Selection Mode
Media Source Selection Mode
Cut Length Selection Mode
Media Type Selection Mode (Bypass Feed only)
Interval Print Mode
Negative Mode
Mirror Mode
8-118
ENTER ONLINE
] Key (increment) and [
ENTER ONLINE
ENTER ONLINE
] Key (decrement).
Reference page
8-122
8-123
8-124
8-125
8-126
8-127
8-127
8-128
8-128
K115sm8e4.doc