Image Placement (For 2Nd And Later Prints) (No.bb); Paper Feed Clutch (Mc6) On Timing (No.bc) - KIP 9000 Service Manual

(30) Image placement (For 2nd and later prints) (No.bb)

The vertical position of print image on the media can be adjusted. This setting is applied to the
2nd and later prints in multiple printing. The setting unit is 0.1mm, and the setting range is from
0 to 100 (0 to 10.0mm). Increment of the value shifts the whole print image to the leading edge
side, that is the leading margin on the print becomes narrower.
Setting value is decreased.

(31) Paper Feed Clutch (MC6) ON timing (No.bC)

It is possible to adjust when the Paper Feed Clutch (MC6) should operate in print process. The
setting unit is 1 millisecond, and the setting range is from 1 to 30 milliseconds.
The ON timing of Paper Feed Clutch (MC6) can be decided taking the ON timing of Paper Gate
Clutch (MC5) as the standard. If you set the No.bC to "20 milliseconds" for example, the Paper
Feed Clutch (MC6) operates (ON) 20 milliseconds earlier than the Paper Gate Clutch (MC5)
operates (ON).
Paper Feed Clutch
(MC6)
Paper Gate Clutch (MC5) & Paper Gate Brake (MC10)
8-70
Setting value is increased.
K115sm8e2.doc