KIP 9000 Service Manual page 664

(9) Developer Bias (Positive) Adjustment Mode (Toner Collection Process) (Item No.7)
Positive Developer Bias is supplied to the Developer Roller.
1. Indicate the Item Number "07" on the 2nd digit. After confirming that "- -" on 5th and 6th digits is
lighting, press the [ ENTER ] Key to start outputting the positive Bias. The 5th and 6th digits
indicate "8 8" in flashing when bias is being outputted.
NOTE
It is unable to start outputting the bias even if the [ ENTER ] Key is pressed if "- -" is flashing
on the 5th and 6th digits.
2. Press the [ ENTER ] Key again to stop outputting. "- -" lights on the 5th and 6th digits again.
NOTE
Make sure to stop outputting manually pressing the [ ENTER ] key as it does not stop
automatically.
MENU ENTER ONLINE
MENU ENTER ONLINE
"8 8" flashes during output.
MENU ENTER ONLINE
MENU ENTER ONLINE
8-139 K115sm8e4.doc