KIP 9000 Service Manual page 253

30) Remove the Ball Bearing (90) and 2 pieces of
Replace the Side Seals 12
90
NOTE
(1) 2 pieces of Side Seal 12 are used on the left of unit.
(2) Push in the 1st one to the deepest position using something like a stick.
(3) Then fit the 2nd one.
(4) After fitting the 2nd one, move the roller shaft
up and down several times. The Side Seals 12
are automatically placed into their correct
installation positions.
Side Seal 12
(91) with the new ones.
5-41
(91) on the left.
90
K115sm5e3.doc
91