KIP 9000 Service Manual page 34

13. Secure the Process Unit tightening 4 M4x14 screws (6). After that, tighten 2 M4x10 screws (5) to
secure the LED Head Unit with keeping a proper focus distance.
NOTE
Process Unit needs to be fixed before LED Head Unit to have correct focus distance. Do not
change the order.
14. Return the Top Center Cover (12), and close the Top Rear Cover (9).
15. Remove 4 M4x10 screws (6), and draw out the Process Unit (8) again.
6
12
2-21
5
6
9
8