KIP 9000 Service Manual page 277

9) Pull out the IR Lamps
Replace the IR Lamps (17) with the new ones.
17
NOTE
(1) There are 2 kinds of IR Lamp.
One has a black wire and another has a white
one.
Make sure to install the black one to the upper
position.
(2) There is a projection on the mid glass part of each IR Lamp.
When the projections of both IR Lamps touch each other, IR Lamps will be broken
because of the vibration.
Make sure to direct these projections to the other directions when you install the IR Lamps.
Projections
(17) gently.
5-65
17
White
OK OK
Black
NG
K115sm5e5.doc