KIP 9000 Service Manual page 596

(32) Roll Paper Feed Clutches (MC1 to MC4) and Bypass Feed Clutch (MC7) ON timing
(No.bd)
It is possible to adjust when the Roll Paper Feed Clutches 1, 2, 3 and 4 (MC1 to MC4) and the
Bypass Feed Clutch (MC7) should operate. The setting unit is 1 millisecond, and the setting range
is from 1 to 20 milliseconds.
The ON timing of these clutches (MC1, MC2, MC3, MC4 and MC7) can be decided taking the ON
timing of Paper Feed Clutch (MC6) as the standard. If you set the No.bd to "10 milliseconds" for
example, these clutches operate (ON) 10 milliseconds earlier than the Paper Feed Clutch (MC6)
operates (ON).
Bypass Feed Clutch
(MC7)
Roll paper Feed Clutch 1
(MC1)
Roll paper Feed Clutch 2
(MC2)
Roll paper Feed Clutch 3
(MC3)
Roll Paper Feed Clutch 4 (MC4)
8-71
Paper Feed Clutch
(MC6)
K115sm8e2.doc