KIP 9000 Service Manual page 265

5.6.4 Adjusting Home Position of Cutter Blade
NOTE
If you have "Cutter Jam" frequently, please check whether the home position of Cutter Blade is
properly adjusted or not.
And if necessary, please adjust in the following way.
You need the following exclusive tools to check and adjust.
HP Adjustment Assembly (3508560021)
HP Adjustment tool 2 (3108500020)
1) Remove the Cutter Unit (1) from the machine making reference to [5.6.1 Removing Cutter Unit]
on the page 5-47.
1
2) Remove 2 pieces of bind head screw (2) to remove
the Lower Paper Guide Plate (3).
Remove a screw (4) on the pin side to remove the
Paper Exit Guide Plate 2 (5).
2
4
5-53
1
5 3
K115sm5e4.doc
2