(16) Pre-Transfer LED ON / OFF (No.16)
It is possible to decide whether or not the Pre-Transfer LED turns ON. There are 2 selectable
settings.
Setting value Description
0
Pre-Transfer LED does not turn ON during the print cycle.
1
Pre-Transfer LED turns ON during the print cycle.
(17) Separation Lamp ON / OFF (PPC) (No.17)
It is possible to decide whether or not the Separation Lamp lights. This setting is applied when a
plain paper is used. There are 2 selectable settings.
Setting value Description
0
Separation Lamp does not light during the print cycle.
1
Separation Lamp lights during the print cycle.
Pre-Transfer LED
Separation Lamp
8-60
K115sm8e2.doc