Summary - KIP 9000 Service Manual

4. 1

Summary

The microcomputer on DC Controller controls the operation of KIP9000. It reads the input signals
from sensors, controls the loads of motors, SSRs, solenoid, clutches and blowers on
programmed timing.
Sensor
DC Controller has an LED, meaning that 5Vdc is applied on this DC Controller safely.
Generally the color of wiring is separated depends on the voltage.
0Vdc: blue
5Vdc: yellow
24Vdc: orange
36Vdc: pink
CAUTION
There are batteries on the Main Control PCB (PW11520).
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
Waste disposal method of battery:
As for the waste disposal of battery, dispose in accordance with local state and federal
relations.
Micro Computer
(CPU & ROM)
Signal in to DC Controller (sensors): purple
Signal out from DC Controller:
4-2
Driver DC Load
gray
K115sm4e1.doc