KIP 9000 Service Manual page 759

8. 3. 3. 6 Test Print Tab
Internal test pattern can be printed out from KIP9000 with specifying several settings as cut length,
number of print, media type and etc. (Test Print Tab covers the function of Test Print Mode of
Service Mode.)
(1)
(2)
(3)
(4)
(1) Select any of 8 test patterns.
(2) Select any of Roll 1, 2, 3, 4 and Bypass Feeder as the media source.
(3) Select any cut lengths.
(4) Specify the number of prints. Maximum number is 999.
(5) Click on [Start] to start printing.
If [Paper Deck] is set to "Manual Feed", [Manual Feed Setting] area becomes changeable.
(6) Select any paper widths according to the used cut sheet paper.
(7) Select any of "Plain Paper", "Tracing Paper" and "Film" according to the type of used cut sheet
paper.
8-234
(6)
(7)
(5)
K115sm8e7.doc