KIP 9000 Service Manual page 438

High volume network printer
Table of Contents

Advertisement

6) Fit the "Drum Gauge for Transfer Guide" (11) into the Drum Shaft (12).
11
7) Close the Process Unit, and then fix it with 4 pieces of screw (13).
8) Bring up the Internal Transportation Unit (14) and lock it at the operation position.
14
NOTE
Make sure to close and lock both the Process Unit and the Internal Transportation Unit before
measurement.
If these units are not locked at the correct positions, it is impossible to measure the gap
correctly.
11
12
13
5-226
13
K115sm5eG.doc

Advertisement

Table of Contents
loading

Table of Contents