Replacing Eraser Lamp A & B - KIP 9000 Service Manual

5.1.3 Replacing Eraser Lamp A & B
1) Remove each Image Corona (1), Cleaning Roller (2) and Drum Assembly (3) from the Process
Unit making reference to [5.1.2 Removing Image Corona, Drum Assembly, Toner Hopper &
Developer Unit] on the page 5-6.
1
2
NOTE
Do not put the Cleaning Roller (2) temporarily on the Process Unit, but please remove it
completely and put it on the paper.
2) Disconnect 2 connectors (4), remove 6 pieces of bind head screws (5) and remove both
Eraser Lamps A & B
Replace Eraser Lamps A & B (6) with the new ones.
4 5
3
(6).
5 4
5-11
6
K115sm5e2.doc