KIP 9000 Service Manual page 421

6) Remove 3 pieces of screw (14) to remove the 50T Spur Gear (15) from the
(16).
Replace the Paper Feed Clutch (16) with the new one.
14
NOTE
Please check whether or not the Paper Feed Clutch is properly installed or not in the following
ways.
(1) Draw out the Middle Roll Deck, and then try to move the Paper Feed Roller left and right
by hand whether or not there is a play.
If there is a play, please put the Thrust Washer between Paper Feed Clutch and Paper
Feed Brake. (If you do not remove the play, it will cause improper cut length.)
(2) Rotate the Paper Feed Roller by hand. If you feel it is heavy to rotate, remove the Thrust
Washer.
Use the following kinds of Thrust Washer according to the necessity.
10.1 x 16 x 0.2
10.1 x 16 x 0.5
10.1 x 16 x 1.0
Thrust Washer
5-209
Paper Feed Clutch
15
Paper Feed Roller
K115sm5eF.doc
16