KIP 9000 Service Manual page 262

3) Remove 2 pieces of tooth washer screw (5) to remove the Solenoid Mount Plate (6).
6
5
4) Remove 2 pieces of bind head screw (7) to remove the Cutter Oil Supply Solenoid (8).
Replace the Cutter Oil Supply Solenoid (8) with the new one.
8
7
NOTE
Fit the boss (9) of the Cutter Oil Supply Solenoid to the hole (10) of the Solenoid Mount Plate.
10 9
Fit the boss to the hole.
5-50 K115sm5e4.doc