Current Setting For The Grid Plate (Applied When Auto Sp Control Is Set To Off) (No.1B); Current Setting For The Transfer Corona Wire (No.1C To 1E) - KIP 9000 Service Manual

(21) Current setting for the Grid Plate (applied when Auto SP Control is set to OFF) (No.1b)

Intensity of current that flows on the Grid Plate can be adjusted. The current specified here is
directly applied when the Auto SP Control is set to OFF. The setting unit is hexadecimal, and the
setting range is from 000 to 500. If the value is increased, Drum will be charged more negative as
more current flows on the Grid Plate.

(22) Current setting for the Transfer Corona Wire (No.1C to 1E)

Intensity of current that flows on the Transfer Corona Wire can be adjusted. The setting unit is
hexadecimal, and the setting range is from 000 to 500. If the value is increased, toner will tend to
be more attracted onto the media as more current flows on the Transfer Corona Wires.
Each Item No. has its own target media.
Please adjust the proper item.
Item No. Target media
1C Plain paper
1d Tracing paper
1E Film
Grid Plate
Transfer Corona Wire
8-63 K115sm8e2.doc