Te Margin For Roll 3 (No.54 To 5F) - KIP 9000 Service Manual

(8) TE margin for Roll 3 (No.54 to 5F)

It is possible to adjust the length of TE margin. These settings are applied when printed with
Roll 3. The setting unit is 0.1mm, and the setting range is from 0 to 200 (0mm to 20.0mm).
Increment of the value provides more TE margin.
Value is decreased.
Exch Item No. has its own target media type and media size.
Please adjust the proper item.
Item No. Media type
54 Plain paper
55 Plain paper
56 Plain paper
57 Plain paper
58 Tracing paper
59 Tracing paper
NOTE
(1) Media sizes "large", "medium", "small" and "smallest" stand for as follows.
Metric (Width)
Large A0 and B1
Medium A1 and B2
Small A2 and B3
Smallest A3
(2) Items from No.54 to 5F are "dual value items" that are available to set both "Standard
Setting Value" and "Special Setting Value".
Refer to [(10) Standard / Special Setting Value Changing Modes (Items No.09, 0A & 0b)]
on and after the page 8-51 for the detail.
Media size Item No.
Large 5A
Medium 5b
Small 5C
Smallest 5d
Large 5E
Medium 5F
Inch (Width)
36", 34" and 30"
24" and 22"
18" and 17"
12" and 11"
8-103
Value is increased.
Media type Media size
Tracing paper Small
Tracing paper Smallest
Film Large
Film Medium
Film Small
Film Smallest
K115sm8e3.doc