Page 1
DIGITAL COLOR PRINTER KIP C7800 Hardware Operation Guide Version A.0 - Please read this Hardware Operation Guide before using the printer. - Please keep this Hardware Operation Guide for future reference. KATSURAGAWA ELECTRIC CO., LTD.
Page 2
Thank you for purchasing the DIGITAL COLOR PRINTER KIP C7800. This Hardware Operation Guide contains functional and operational explanations for the KIP C7800. Please read this Hardware Operation Guide carefully before using the Printer. Please keep this Hardware Operation Guide for future reference.
(see certifications) Ventilate the room, if required. (8) Levelling Bolts on the bottom of the KIP C7800 should touch the floor correctly. And the equipment must be levelled. Floor strength must be ample to sustain the weight of the equipment.
1. 4 Specifications Subject Specification Model KIP C7800 Type Console Printing method LED Array Electro Photography Color CMYK Photoconductor Organic Photoconductive Drum Print speed Color : 100mm / second max. (4.6ppm / 36”x48”) (4.7ppm / A0) (for Roll Deck 3), speed varies by media type) Mono : 120mm / second (xx ppm / 36”x48”) (xx ppm / A0)
Page 5
Subject Specification Media Plain Paper / Bond: Color mode: 70 to 150g/m * For heavier media (90 to 150g/m ), use media type setting “Heavy”. Mono mode: 70 to 75g/m Environmental Temperature 15 to 27 degrees centigrade condition Humidity 20 to 70% RH Storage condition of Print media Wrap the media surely to shut out the humidity.
Please confirm the outlet satisfies the following condition before plugging the KIP C7800 into. 220-240V (+6% to -10%), 20A, and 50/60Hz 2. Press “|” side of the Power Switch on the front to turn on the KIP C7800. Press this side 3.
Page 7
4. The KIP C7800 will get ready about 3 minutes after turning on. The Status Indicator stops blinking and lights green when ready. Make a copy or print from outer devices. Chapter 2 Basic Operations...
The controller unit starts shutdown process after turning off the KIP C7800, and it will take about 2 minutes until complete shut down. Do not unplug the KIP C7800 from the outlet for about 2 minutes after turning off therefore. The controller unit may be broken if the KIP C7800 is unplugged before the completion of shut down process.
Page 9
3. If you completely shut the power supply due to a long vacation or the machine’s transport, turn off the circuit breaker and then remove the power cable from the machine. Chapter 2 Basic Operations...
2. 8 Sleep Mode The KIP C7800 has two Sleep Modes to reduce the power consumption. The KIP C7800 will enter Sleep Mode after a certain period of inactivity. In the default setting; • Warm Sleep Mode will start after a 15 minute of inactivity in order to reduce the power supply for Fuser Unit.