KIP 9000 Service Manual page 219

3) Catch the shaft of Cleaning Roller (6), bring it up (bring up driving side first then driven side) to
remove the bearings (7) from the brackets.
As there are notches (8) near the setting position, fit the bearings (7) to put the Cleaning Roller (6)
temporarily.
(Driving side)
7
NOTE
Please put back the Cleaning Roller to the setting position before you close the Process Unit.
If you close the unit without putting back the roller, roller will touch the plate and its surface will
be broken!
8 6
5-7
(Driven side)
6 8
7
K115sm5e2.doc