KIP 9000 Service Manual page 366

3) Remove 2 pieces of screw (4) at both sides, and remove the Corona Housing 5 (5) and several
sheets of Spacers 1 (6) from both sides.
4
6
NOTE
As the Spacers 1 (6) adjust the height of Corona Housing 5 (5), the number of them used is
different among unit.
Do not lose or add them without any reason as the height will change.
Also, please remember how many sheets were used on each side because the number may
be different between both sides.
4) Remove the Flash Head Screw (7) to remove each Head Cover 3 (8) and Head Cover 4 (9).
5
9
7
5-154
5 4
8
7
K115sm5eB.doc
6