KIP 9000 Service Manual page 32

11. Connect 3 connectors (23) to LED Head and 1 connector (24) of Cleaning Motor.
12. Confirm that the right side of LED Head can be easily moved up and down by hand, then push
the Process Unit (8) into the machine fully. (See NOTE on the next page before closing
the Process Unit.)
The positioning bars (25) on the right of LED Head Unit will fit into the positioning slits (26)
when Process Unit is closed, and a proper gap (focus distance) can be kept between LED
Head and Drum this time.
23
26
24
25
2-19
8